RS485/RS485 isolated repeater 0(4)..20mA isolated repeater 0(4)..20mA isolated splitter
-Half-duplex isolated RS485
repeater
-Serves as galvanic separator
and line extension
-Data rate independent flow
control
-Data rate from 600Bd to 57kBd
-Transient voltage suppression
-Mounts on Type T DIN-rail
-12V or 24V DC power, 30mA
-Isolated input to output
-Isolated DC power
-Input: 0(4)..20mA
-Output: current sink/source,
active or passive
-Failsafe output, programmable
zero-input value with timing.
-Slope reverse function
-Linearity better then 0.05%FS
-Mounts on Type T DIN-rail
-24V DC power, 30mA
-Isolated input to outputs
-Isolated DC power
-Input: 0(4)..20mA
-Output: dual, current sink,
passive
-Failsafe output, programmable
zero-input value with timing.
-Slope reverse function
-Linearity better then 0.05%FS
-Mounts on Type T DIN-rail
-24V DC power, 50mA
CODE:D22-485-485-HD-ISO-12(24) CODE:D22-420-420-ISO CODE:D22-420-2x420-ISO
0(4)..20mA to voltage converter 0(4)..20mA to frequency converter 0(4)..20mA to pulse width converter
-Isolated input to output
-Isolated DC power
-Input: 0(4)..20mA
-Output: 0-5V, 0-10V, 2-10V or
custom range, programmable
-Failsafe output, programmable
zero-input value with timing.
-Slope reverse function
-Linearity better then 0.05%FS
-Mounts on Type T DIN-rail
-24V DC power, 30mA
-Isolated input to output
-Isolated DC power
-Input: 0(4)..20mA
-Output: programmable range
frequency output
-Failsafe output, programmable
zero-input value with timing.
-Slope reverse function
-Linearity better then 0.05%FS
-Mounts on Type T DIN-rail
-12V DC power, 30mA
 
-Isolated input to output
-Isolated DC power
-Input: 0(4)..20mA
-Output: 0-100% or 10%-90%
500Hz width modulated, load
max.12Vdc max.2A
-Failsafe output, programmable
zero-input value with timing.
-Slope reverse function
-Linearity better then 0.05%FS
-Mounts on Type T DIN-rail
-12V DC power, 50mA
CODE:D22-420-U-ISO CODE:D22-420-FRQ-ISO CODE:D22-420-PWM-ISO
Voltage to 4..20mA converter Frequency to 4..20mA converter Pulse width to 4..20mA converter
-Isolated input to output
-Isolated DC power
-Input: 0-5V, 0-10V, 2-10V or
custom range, programmable
-Output: 4..20mA
-Failsafe output, programmable
zero-input value with timing.
-Slope reverse function
-Linearity better then 0.05%FS
-Mounts on Type T DIN-rail
-24V DC power, 30mA
 
-Isolated input to output
-Isolated DC power
-Input: programmable range
frequency output
-Output: 0(4)..20mA
-Failsafe output, programmable
zero-input value with timing.
-Slope reverse function
-Linearity better then 0.05%FS
-Mounts on Type T DIN-rail
-24V DC power, 30mA
 
-Input: 0-100% or 10%-90%
pulse width modulated signal
from 10Hz to 10kHz
-Output: 0(4)..20mA
-Failsafe output, programmable
zero-input value with timing.
-Slope reverse function
-Linearity better then 0.1%FS
-Mounts on Type T DIN-rail
-24V DC power, 30mA
-Isolated input to output
-Isolated DC power
CODE:D22-U-420-ISO CODE:D22-FRQ-420-ISO CODE:D22-PWM-420-ISO
Th.couple to 4..20mA converter Pt100/1000 to 4..20mA converter Strain/force to 4..20mA converter
-Input: K type thermocouple
-Range:0-52.4mV(0-1300grdC)
-Cold junction compensated
-Linearized cf.ITS-90
-Output: 4..20mA , passive
-Linearity better then 0.1%FS
-Isolated from DC power,1kVdc
-Mounts on Type T DIN-rail
-24V DC power, 70mA
-Input: RTD, Pt100 or Pt1000
-Range:-20..+450grdC
-Linearized cf.IEC751 Class B
-Output:4..20mA, passive
-Linearity better then 0.02%FS
-Isolated from DC power,1kVdc
-Mounts on Type T DIN-rail
-24V DC power, 70mA
-Input: differential voltage from
resistive bridge type sources
-Fixed gain instrumentation
amplifier with high CMRR
-Bridge supply voltage:+5Vdc
-Output:4..20mA, passive
-Linearity better then 0.02%FS
-Isolated from DC power,1kVdc
-Mounts on Type T DIN-rail
-24V DC power, 70mA
CODE:D22-TCK-420-ISO CODE:D22-RTD-420-ISO CODE:D22-GAGE-420-xx: Gain=1,2,10,20,50,100,200,1000

                                            

2x 0(4)..20mA input transmitter 0(4)..20mA input transmitter Voltage input transmitter
-Input: dual (0)4..20mA
-Totally isolated and polarity
insensible inputs
-Linearity better then 0.05%FS
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 70mA
-Input: (0)4..20mA, isolated and
polarity insensible
-Linearity better then 0.05%FS
-24V 50mA aux.supply, isolated
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 70mA
-Input: in range of 0-10Vdc
isolated,1kVdc
-Linearity better then 0.05%FS
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 70mA
CODE:D22-2x420-485-ISO CODE:D22-420-485 CODE:D22-U-485
PWM input transmitter Pulse counter& transmitter Quadrature counter& transmitter
-Input: Pulse Width Modulated
signal, max.ampl.:-12V..+12V
min.ampl.:0/5V, max.10kHz
-Accepts NPN/OC type sources
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Output isolated from DC power
-Mounts on Type T DIN-rail
-12V or 24V DC power, 70mA
-Input: rectangular pulse signal
5%..95%,max.ampl.:-12V..+12V
min. ampl.:0V/5V, max.10kHz
-Accepts NPN/OC type sources
-Counter capacity:4x10^9
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Output isolated from DC power
-Mounts on Type T DIN-rail
-12V or 24V DC power, 70mA
-Input: quadrature-encoded
pulses, duty 45%..55%,
max.ampl.:-12V..+12V(0..24V)
min.ampl.:0V/5V, max.10kHz
-Direct or reverse counting
-Counter capacity:+/-2x10^9
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Output isolated from DC power
-Mounts on Type T DIN-rail
-12V or 24V DC power, 70mA
CODE:D22-PWM-485-12(24) CODE:D22-CNT-485-12(24) CODE:D22-QCNT-485-12(24)
Thermocouple input transmitter RTD input transmitter Strain gage signal input transmitter
-Input: K* type thermocouple
-Range:0-52.4mV(0-1300grdC)
-Cold junction compensated
-Linearized cf.ITS-90
-Linearity better then 0.1%FS
-Isolated from DC power,1kVdc
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 70mA
-Input: RTD, Pt100 or Pt1000
-Range:-20..+450grdC
-Linearized cf.IEC751 Class B
-Linearity better then 0.02%FS
-Isolated from DC power,1kVdc
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 70mA
-Input: differential voltage from
resistive bridge type sources
-Fixed gain instrumentation
amplifier with high CMRR
-Bridge supply voltage:+5Vdc
-Input isolated from DC power
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 70mA
CODE:D22-TCK-485 CODE:D22-RTD-485 CODE:D22-GAGE-485-x: Gain:1,2,5,10,20,50,100,500,1000
MEISHI.422 input transmitter Four contact state input transmitter AC/DC V/I input transmitter
  -connects to and reads data
from a MEISHI.422 type sensor
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Linearity better then 0.1%FS
-Isolated from DC power,1kVdc
-Mounts on Type T DIN-rail
-12V or 24V DC power, 70mA
-Inputs : 8V...28V voltage levels
with common return, isolated
from output and power
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 70mA
-Input V: 90-250Vrms, 50Hz
-Input I: 0-14Arms
-True RMS and power factor
measurement
-All inputs isolated, 1kVdc
-Output: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Linearity better then 1%FS
-Mounts on Type T DIN-rail
-12V to 24V DC power, 70mA
CODE:D22-M422-485 CODE:D22-4C-485 CODE:D22-UI-AC-485-12(24)

                                             

4..20mA output RS485 node dual 4..20mA output RS485 node Voltage output RS485 node
-Isolated output (1kVdc)
-Output:sink/source, active
-Linearity better then 0.05%FS
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-Mounts on Type T DIN-rail
-12V to 24V DC power, 30mA
-Isolated outputs (1kVdc)
-Output:sink/source, passive
-Linearity better then 0.05%FS
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-Mounts on Type T DIN-rail
-12V to 24V DC power, 30mA
-Isolated output (1kVdc)
-Output: 0..10V (0..5V, 2..10V)
-Linearity better then 0.05%FS
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-Mounts on Type T DIN-rail
-12V to 24V DC power, 30mA
CODE:D22-485-420-ISO CODE:D22-485-2x420-ISO CODE:D22-485-U-ISO
Full-bridge output RS485 node PROFET output RS485 node dual MOSFET output RS485 node
-Full-bridge output, clockwise,
counterclockwise, brake, HiZ
functions, with overvoltage
and thermal protection
-Us:24Vdc max.I:20A
-Internal PWM modulator, 16bit
(at 500Hz) to 10bit (at 10kHz)
resolution
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220)
-fact.prg.baudrate:9600,8,N,1
-24V DC power, 10mA
-Isolated PWM/ON/OFF output
for grounded inductive loads
-Duty factor 0..100%, 500Hz
-Short-circuit, over-current and
thermal protection
-Uin: 24Vdc Imax.: 10A
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220)
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-Isolated outputs (1kVdc)
-Programmable dead-time
for half-bridge configuration
-HV(max.600V 2A) or LV(max.
100V 10A) version
-Internal PWM modulator, 16bit
(at 500Hz) to 10bit (at 10kHz)
resolution
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220)
-fact.prg.baudrate:9600,8,N,1
-12V to 24V DC power, 30mA
CODE:D22-485-FB CODE:D22-485-PWM-ISO CODE:D22-485-2xMOS-HV(LV)
ZC-TRIAC output RS485 node RPH-TRIAC output RS485 node dual TRIAC output RS485 node
-Zero-cross TRIAC output
-ON/OFF control of rezistive or
light inductive loads
-max.U: 250Vac max.I: 8Arms
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1.
-Mounts on Type T DIN-rail
-12 to 24Vdc power
-Input-output isolation 1kVdc
-Random phase TRIAC output,
5% to 100% power span
-max.U: 250Vac max.I: 8Arms
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-12V to 24V DC power, 30mA
-Input-output isolation 1kVdc
-Isolated ZC-TRIAC outputs
for AC driven contactors
-max.U: 250Vac max.I: 2A
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 50mA
CODE:D22-485-ZCT CODE:D22-485-RPT CODE:D22-485-2xZCT
dual SSR output RS485 node Four NPN-OC output RS485 node dual NO-NO output RS485 node
-Isolated Solid State outputs
-max.U: 24Vdc max.I: 2A
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial(on energization) value
and/or connection-lost value
with timing.
-Mounts on Type T DIN-rail
-NPN transistor open collector
outputs with common return
isolated from the input circuit
-max.U:300V max.I:120mA
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-12V to 24V DC power, 50mA
-Normally open relay contacts
-max.U: 250Vac/dc max.6A each
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg.address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 80mA
 
CODE:D22-485-2xSS CODE:D22-485-4xOC CODE:D22-485-NO-NO

 

                             D66-CTX-3F (+PM48) 3phase AC/DC current transmitter /relay

Nu neccesita transformatoare de curent

   
CTx-3F este un modul electronic montabil pe sina DIN avand functiile de masurare directa a valorilor efective ai curentilor electrici pe trei faze si transmiterea valorilor printr-o conexiune seriala RS485 (protocol Modbus RTU) si optional la modulul de afisare PM48-LED . Echipat cu o iesire de alarma supracurenti. Intrari/iesiri izolate galvanic  
Valoarea efectiva maxima pe faze: 35.3A.rms
Afiseaza alternativ sau cu selectare manuala valoarea
curentilor pe faze, valoarea medie si valoarea referintei
Setarea parametrilor este posibila prin afisaj sau prin SCADA

 

                            D66-CTX-3F-D66-LCD  3phase AC/DC current relay

Nu neccesita transformatoare de curent

   
CTx-3F este un modul electronic montabil pe sina DIN avand functiile de masurare directa a valorilor efective ai curentilor electrici pe trei faze si transmiterea valorilor printr-o conexiune seriala la modulul de afisare D66-LCD (sau PM72-LCD cu montare pe panoul frontal). Echipat cu o iesire de alarma supracurenti. Intrari/iesiri izolate galvanic  
Valoarea efectiva maxima pe faze: 35.3A.rms
Afiseaza alternativ sau cu selectare manuala valoarea
curentilor pe faze, valoarea medie si valoarea referintei
Setarea parametrilor este posibila prin afisaj.

 

                               D22-CTX-1F (+PM48) 1phase AC/DC current transmitter /relay

Nu neccesita transformator de curent

   
D22-CTx-1F este un modul electronic montabil pe sina DIN avand functiile de masurare directa a valorilor efective ai curentului electric pe o faza si transmiterea valorilor printr-o conexiune seriala RS485 (protocol Modbus RTU) si optional la modulul de afisare PM48-LED . Echipat cu o iesire de alarma supracurenti. Intrari/iesiri izolate galvanic.  
Valoarea efectiva maxima : 35.3 Arms
Afiseaza alternativ sau cu selectare manuala valoarea
curentului, valoarea medie si valoarea referintei
Setarea parametrilor este posibila prin afisaj sau prin SCADA

 

                               D22-CTX-3F(+PM48) 3phase AC/DC current transmitter /relay

Nu neccesita transformatoare de curent

   
D22-CTx-3F este un modul electronic montabil pe sina DIN avand functiile de masurare directa a valorilor efective al curentului electric pe faze si transmiterea valorilor printr-o conexiune seriala RS485 (protocol Modbus RTU) si optional la modulul de afisare PM48-LED . Echipat cu o iesire de alarma supracurenti. Intrari/iesiri izolate galvanic  
Valoarea efectiva maxima pe faze : 14.2 Arms
Afiseaza alternativ sau cu selectare manuala valoarea
curentului, valoarea medie si valoarea referintei
Setarea parametrilor este posibila prin afisaj sau prin SCADA

 

                            D22-CVTX-1F (+PM48) single phase current/voltage transmitter

Nu neccesita transformator de curent

   
D22-CVTx-1F este un modul electronic montabil pe sina DIN avand functiile de masurare directa a valorilor efective ai curentului si tensiunii electrice pe o faza si transmiterea valorilor printr-o conexiune seriala RS485 (protocol Modbus RTU) si optional la modulul de afisare PM48-LED . Intrari/iesiri izolate galvanic, min.1 kV.  
Valoarea efectiva maxima : 14.2 Arms
Afiseaza alternativ sau cu selectare manuala valoarea
instantatanee a curentului/ tensiunii sau valoarea medie
 

 

Modulele D66-CTx-3F, D22-CTx-1F, D22-CTx-3F pot fi utilizate in regim de inregistrator de semnal in conjunctie cu programul TransientTricorder care ruleaza pe PC sau laptop sub Windows. Permite vizualizarea formelor de unda de curent pe 1-2 sau 3 faze cu o rata de esantionare de cca. 50ksps si rezolutie de 10biti (0.1A la traductoare de curent de +/-50A). Sunt parametri modesti dar suficienti pentru verificarea unor defazaje sau distorsiuni ale curentilor in sistemele cu contactori statici cu tiristori sau triace. Programul permite netezirea semnalului esantionat cu un filtru de tip LULU. Programul executabil si codul sursa (Delphi) poate fi descarcat aici si utilizat sub licenta Apache 2.0

 

Price list
  Item     1-5     6-30    over 30   Availability
 Signal converters
  D22-485-485-HD-ISO      25       *          *     2 weeks
  D22-420-420-ISO      19       *             *     in stock
  D22-420-2x420-ISO      19       *            *      2 weeks
  D22-420-U-ISO      19       *          *      in stock
  D22-420-FRQ-ISO      19       *              *     in stock
  D22-420-PWM-ISO      19          *          *         in stock    
  D22-U-420-ISO      19       *          *      in stock
  D22-FRQ-420-ISO      17       *            *     2 weeks
  D22-PWM-420-ISO      17       *           *      in stock
  D22-TCK-420-ISO      29       *          *      in stock
  D22-RTD-420-ISO      29       *             *     in stock
  D22-GAGE-420-x      29          *          *         in stock   
 Signal-to-RS485
  D22-2x420-485-ISO      21          *          *         2 weeks   
  D22-420-485      19       *          *      in stock
  D22-U-485      19       *             *     in stock
  D22-PWM-485      23       *          *      in stock
  D22-CNT-485      23       *          *      in stock
  D22-QCNT-485      23       *           *     in stock
  D22-TCK-485      32           *           *         in stock   
  D22-RTD-485      32       *           *      in stock
  D22-GAGE-485-x      32       *              *     in stock
  D22-M422-485       *       *           *          **
  D22-4C-485      17       *           *      in stock
  D22-UI-AC-485      29       *               *     2 weeks
 RS485-to-signal
  D22-485-420-ISO      29              *          *         in stock  
  D22-485-2x420-ISO      29       *          *         2 weeks   
  D22-485-U-ISO      29         *          *         in stock  
  D22-485-FB      35       *          *      in stock
  D22-485-PWM-ISO      15       *               *     in stock
  D22-485-2xMOS-HV      15       *            *      in stock
  D22-485-2xMOS-LV      17         *          *      in stock
  D22-485-ZCT      19       *               *     in stock
  D22-485-RPT      19            *          *         in stock
  D22-485-2xZCT      25       *          *      2 weeks   
  D22-485-2xSS      27       *              *         **
  D22-485-4xOC      19       *            *      in stock
  D22-485-NO-NO      19         *          *      in stock
 Current transmitters
  D66-CTx-3F      47      45           *     in stock
  D22-CTx-1F      25          23          *         in stock   
  D22-CTx-3F      22          21          *         2 weeks   
  D22-CVTx-1F      29      26          *      2 weeks
 Display units
  PM48-LED      15      13          *     in stock
  D66-LCD      29       *          *     3 weeks
  PM72-LCD      29       *          *          **
*Contact us for pricing     **Contact us for availability        All prices in Euro