4..20mA output RS485 node dual 4..20mA output RS485 node Voltage output RS485 node
-Isolated output (1kVdc)
-Output:sink/source, active
-Linearity better then 0.05%FS
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-Mounts on Type T DIN-rail
-12V to 24V DC power, 30mA		 -Isolated outputs (1kVdc)
-Output:sink/source, passive
-Linearity better then 0.05%FS
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-Mounts on Type T DIN-rail
-12V to 24V DC power, 30mA		 -Isolated output (1kVdc)
-Output: 0..10V (0..5V, 2..10V)
-Linearity better then 0.05%FS
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-Mounts on Type T DIN-rail
-12V to 24V DC power, 30mA
CODE:D22-485-420-ISO CODE:D22-485-2x420-ISO CODE:D22-485-U-ISO
Full-bridge output RS485 node PROFET output RS485 node dual MOSFET output RS485 node
-Full-bridge output, clockwise,
counterclockwise, brake, HiZ
functions, with overvoltage
and thermal protection
-Us:24Vdc max.I:20A
-Internal PWM modulator, 16bit
(at 500Hz) to 10bit (at 10kHz)
resolution
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220)
-fact.prg.baudrate:9600,8,N,1
-24V DC power, 10mA		 -Isolated PWM/ON/OFF output
for grounded inductive loads
-Duty factor 0..100%, 500Hz
-Short-circuit, over-current and
thermal protection
-Uin: 24Vdc Imax.: 10A
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220)
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.		 -Isolated outputs (1kVdc)
-Programmable dead-time
for half-bridge configuration
-HV(max.600V 2A) or LV(max.
100V 10A) version
-Internal PWM modulator, 16bit
(at 500Hz) to 10bit (at 10kHz)
resolution
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220)
-fact.prg.baudrate:9600,8,N,1
-12V to 24V DC power, 30mA
CODE:D22-485-FB CODE:D22-485-PWM-ISO CODE:D22-485-2xMOS-HV(LV)
ZC-TRIAC output RS485 node RPH-TRIAC output RS485 node dual TRIAC output RS485 node
-Zero-cross TRIAC output
-ON/OFF control of rezistive or
light inductive loads
-max.U: 250Vac max.I: 8Arms
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1.
-Mounts on Type T DIN-rail
-12 to 24Vdc power
-Input-output isolation 1kVdc		 -Random phase TRIAC output,
5% to 100% power span
-max.U: 250Vac max.I: 8Arms
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-12V to 24V DC power, 30mA
-Input-output isolation 1kVdc		 -Isolated ZC-TRIAC outputs
for AC driven contactors
-max.U: 250Vac max.I: 2A
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 50mA
CODE:D22-485-ZCT CODE:D22-485-RPT CODE:D22-485-2xZCT
dual SSR output RS485 node Four NPN-OC output RS485 node dual NO-NO output RS485 node
-Isolated Solid State outputs
-max.U: 24Vdc max.I: 2A
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial(on energization) value
and/or connection-lost value
with timing.
-Mounts on Type T DIN-rail		 -NPN transistor open collector
outputs with common return
isolated from the input circuit
-max.U:300V max.I:120mA
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg. address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Failsafe output, programmable
initial value and/or connection-
lost value with timing.
-12V to 24V DC power, 50mA		 -Normally open relay contacts
-max.U: 250Vac/dc max.6A each
-Input: Modbus RTU server on
RS485 Schneider polarization
-fact.prg.address:0xDC (220),
re-programmable
-fact.prg.baudrate:9600,8,N,1
-Mounts on Type T DIN-rail
-12V to 24V DC power, 80mA
 
CODE:D22-485-2xSS CODE:D22-485-4xOC CODE:D22-485-NO-NO
Parametrii fizico-constructivi
 
Dimensiuni in mm		 Constructie modulara semideschisa cu montare pe sina DIN 35mm (DIN EN 50022) prin mechanism de zavorire elastica.
Material carcasa: nylon V0
Greutate max.50g
Clasa de protectie IP20
RoHS: Conform cu RoHS
REACH: Nu contine substante listate SVHC
DEEE: contine materiale reciclabile

 

Price list
  Item     1-5     6-30    over 30   Availability
 RS485-to-signal
  D22-485-420-ISO      29              *          *         in stock  
  D22-485-2x420-ISO      29       *          *         2 weeks   
  D22-485-U-ISO      29         *          *         in stock  
  D22-485-FB      35       *          *      in stock
  D22-485-PWM-ISO      15       *               *     in stock
  D22-485-2xMOS-HV      15       *            *      in stock
  D22-485-2xMOS-LV      17         *          *      in stock
  D22-485-ZCT      19       *               *     in stock
  D22-485-RPT      19            *          *         in stock
  D22-485-2xZCT      25       *          *      2 weeks   
  D22-485-2xSS      27       *              *         **
  D22-485-4xOC      19       *            *      in stock
  D22-485-NO-NO      19         *          *      in stock
*Contact us for pricing     **Contact us for availability        All prices in Euro